8 FAQ About Reverse Osmosis Filters

When it comes to picking a reverse osmosis filter that is perfect for your lifestyle, home, and family you might have some questions. We have put together a list of 8 frequently asked questions about reverse osmosis filters.

1. What Is A Reverse Osmosis?

The U.S. Navy developed reverse osmosis filters (or RO Filters) to purify seawater from submarine crews. This membrane filtration technology works by pushing water through very small pores in a semi-permeable barrier. Modern RO units are a combination of membrane technology and carbon filtration for great-tasting water.

2. What Is The Process?

Simply put, modern home units are powered by the normal city water pressure. Water flows through a sediment filter which removes dirt and particles. The carbon pre-filter removes organic contaminants such as chlorine and its byproducts. The water then passes through the reverse osmosis membrane, which is a tight, sheet-like filter that allows water to flow but rejects dissolved solids as well as impurities like arsenic, lead, and sodium. The membrane surface is cleaned with some of the water that enters the unit. This water then flows to the kitchen drainpipes. The purified water is kept in a small tank until it is used. The faucet on the sink opens and purified water passes through another carbon filter. This polishes the water and makes it ready for use. There is much more to the reverse osmosis system than this simple description. Check valves, flow control devices, and automatic shutoff devices which stop water from flowing into the storage tank when it is full all play an important role, but we will save you the time.

3. Which RO System Is Best?

RO membranes all produce high-purified water. Not all RO membranes offer the same features. For city water applications, the Paragon Water Solution’s reverse osmosis filter is the best on the market. The unit is composed of five stages. First, the water goes through a micron sediment-polypropylene prefilter. Next, solid extruded a carbon block filter is used to remove chlorine. Finally, the RO membrane is used to remove small contaminants. Finally, another carbon filter polishes the taste. With its high-efficiency design, the Paragon Water Solution’s reverse osmosis filter is designed to conserve water. The non-electric permeate pumps utilize the drain flow to lower the backpressure in the storage tank, allowing for a consistent membrane pressure. Paragon Water Solution’s reverse osmosis filter was designed for consumers who want a premium RO that is low-maintenance. This model features a low-profile polypropylene storage container, a designer water dispenser faucet, and multiple filter heads that can pivot 180 degrees. There are built-in shut-off valves so it is easy to replace filters.

4. Is Distilled Water More Pure Than RO Water?

Most distillers remove only a few more common minerals like sodium. But distillers are not efficient when it comes to volatile chemicals that have a low boiling temperature. E.g. Distillers don’t remove chloramines as well as chlorine, which are used in many cities as disinfectants. However, reverse osmosis filters, when used with carbon filters, is very effective in removing any evidence of chloramines. If volatile chemicals such as chlorine are not removed by carbon filtering before entering the distiller they will either be released into the atmosphere or end up in the distilled waters. Both methods still produce water that is very pure.

5. How Much Does Annual Maintenance Cost?

Pre-filters and post-filters do not need to be changed on an annual basis in order to maintain proper performance. The frequency of filter replacements will depend on the quality of water and how much it is used. The annual cost of the RO model used depends on which one you choose. It is usually less than $0.30 per day. The RO membrane will typically last between two to five years.

6. Can I Attach a RO Unit To My Refrigerator/icemaker?

Yes, but only if the appliance can be reached with a 1/4 inch tube from the RO unit. Some refrigerators have pressure issues, so make sure to consult the manufacturer. The RO unit will give you pressure that is approximately 2/3 of the incoming pressure.

7. How Long Can An RO Unit Last?

It will last almost forever if it is maintained regularly and parts like the storage tank are replaced as they wear. The typical membrane life depends on the type of water it is processing.

8. Why Is RO So Popular?

They produce high-quality, pure water that tastes great and is affordable compared to buying bottled water. Water drinkers who are committed to drinking water know that not all water tastes like.

Contact Paragon Water Today

If you are looking for the best Water Filter manufacturer then look no further. Paragon Water Solutions has been around for decades and can provide easy solutions to any water problems in your home. There are many products available, including 3 stage reverse osmosis filter system, 4 stage reverse osmosis filter system, RO filter replacement, carbon block water filter, and under sink water filters. Our company is customer-driven and has a passion to save lives from water-borne illnesses. All water products are designed, engineered, assembled, and manufactured in our laboratories. They can be customized to meet your specific needs. If you have problems with your water filtration or if your water is not being cleaned properly, go straight to the water filter manufacturer Paragon Water Solutions, contact us today!